(1) Keep the maintenance site clean and sanitary.
(2) Do not carry loose items or valuables with you during maintenance.
Be careful!
When repairing the electrical system of the electric stacker, if the metal contacts the energized electronic components, it is easy to cause short circuit or combustion. So please take off your watch, earrings or other accessories.
(3) Unplug the power socket and disconnect the power before the maintenance of the electric stacker.
(4) Turn off the key switch of the forklift before opening the left and right box covers or the electrical system.
(5) Before checking the hydraulic system, lower the fork to release the system pressure.
(6) When checking the oil leakage of the car body, please wipe it with paper or cardboard and do not touch it directly with your hands. Avoid scalding.
(7) Please note that the oil temperature in the transmission device or hydraulic system may be high. The electric stacker should be cooled first, and then the gear oil or hydraulic oil should be replaced to prevent burning due to high oil temperature.
(8) The hydraulic system should be filled with new clean oil.
Be careful!
If the hydraulic oil is not clean, it will affect the precision hydraulic components and reduce the capacity of the entire hydraulic system.
If different brands of hydraulic oil are used, it will damage the hydraulic components and affect the system capacity. Therefore, when adding or replacing hydraulic fluid, pay attention to the use of uniform brand.
(9) Please comply with relevant laws and regulations, protect the environment, store and discharge oil according to regulations, and do not discharge it to the sewer.
(10) When welding the car body, disconnect the battery power supply. Because the welding current may enter the battery during welding, please cut off the battery in order to avoid this situation.
(11) When working under the electric stacker, the electric stacker shall be firmly supported by the bracket.
Warning!
Improper support will cause the electric stacker to tip over and hurt people. If the electric stacker is not protected by lifting equipment or support, it is forbidden to work under the electric stacker.
(1) Keep the maintenance site clean and sanitary.
(2) Do not carry loose items or valuables with you during maintenance.
Be careful!
When repairing the electrical system of the electric stacker, if the metal contacts the energized electronic components, it is easy to cause short circuit or combustion. So please take off your watch, earrings or other accessories.
(3) Unplug the power socket and disconnect the power before the maintenance of the electric stacker.
(4) Turn off the key switch of the forklift before opening the left and right box covers or the electrical system.
(5) Before checking the hydraulic system, lower the fork to release the system pressure.
(6) When checking the oil leakage of the car body, please wipe it with paper or cardboard and do not touch it directly with your hands. Avoid scalding.
(7) Please note that the oil temperature in the transmission device or hydraulic system may be high. The electric stacker should be cooled first, and then the gear oil or hydraulic oil should be replaced to prevent burning due to high oil temperature.
(8) The hydraulic system should be filled with new clean oil.
Be careful!
If the hydraulic oil is not clean, it will affect the precision hydraulic components and reduce the capacity of the entire hydraulic system.
If different brands of hydraulic oil are used, it will damage the hydraulic components and affect the system capacity. Therefore, when adding or replacing hydraulic fluid, pay attention to the use of uniform brand.
(9) Please comply with relevant laws and regulations, protect the environment, store and discharge oil according to regulations, and do not discharge it to the sewer.
(10) When welding the car body, disconnect the battery power supply. Because the welding current may enter the battery during welding, please cut off the battery in order to avoid this situation.
(11) When working under the electric stacker, the electric stacker shall be firmly supported by the bracket.
Warning!
Improper support will cause the electric stacker to tip over and hurt people. If the electric stacker is not protected by lifting equipment or support, it is forbidden to work under the electric stacker.
